Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-2713001.png)
Seat Belt Tensioner: Service and Repair
Front Safety Belt Retractor
Front Safety Belt Retractor
Service Repair No - 76.73.13
Removal
1. Position the front seat fully forwards.
2. Remove the scuff plate trim panel.
3. Release the safety belt upper anchor.
^
Remove and discard the Torx bolt.
4. Remove the safety belt retractor assembly.
^
Remove and discard the Torx bolt.
Installation
1. Install the front safety belt retractor.
^
Tighten the Torx bolt to 40 Nm (30 lb.ft).
2. Attach the safety belt upper anchor.
^
Tighten the Torx bolt to 40 Nm (30 lb.ft).
3. Install the scuff plate trim panel.
