Range Rover Sport (LS) V8-4.2L SC (2006)
Relay Box: Service and Repair
Central Junction Box (CJB)
Central Junction Box (CJB)
Service Repair No - 86.70.56
Removal
1. If the central junction box (CJB) is to be replaced, connect T4 to the vehicle.
2. Remove the glove compartment.
3. Remove the passenger side closing trim panel.
^
Release the clip.
^
Remove the 2 screws.
^
Disconnect the electrical connector.
4. Remove the CJB.
^
Remove the 2 nuts.
^
Disconnect the 6 electrical connectors.
Installation
1. Install the CJB.
^
Connect the electrical connectors.
^
Tighten the nuts to 10 Nm (7 lb.ft).
2. Install the closing trim panel.
^
Connect the electrical connector.
^
Secure the clip.
3. Install the glove compartment.
4. Initiate a new CJB using T4.