landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Steering - Control Valve Actuator Availability|Page 9800 > < Power Steering Line/Hose|Service and Repair|Page 9795
Page 1
background image

Power Steering Pressure Control Valve: Technical Service Bulletins
Steering - Control Valve Actuator Availability

No.: LTB00158

Issue: 1

Date: 24 July 2008

SECTION: 211

Servotronic Steering Control Valve Actuator Availability

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation: 

A Servotronic Steering Control Valve Actuator is now available as a serviceable part. In the event of one of the following conditions, replacement of the
complete steering gear is no longer necessary:

^

Power steering feels heavier than normal through its operating range

^

Power steering feels too light at speed

^

Power steering feels too heavy at rest and low speed

^

Diagnostic Trouble Codes (DTC) C112201, C11231C may be stored

Action: 

To install a new Servotronic Steering Control Valve Actuator, refer to the Repair Procedure outlined below.

PARTS:

LR010373 ................Servotronic Steering Valve Qty: 1

TOOLS:

Refer to Workshop Manual (GTR) for any special tools that may be required.

WARRANTY

REPAIR PROCEDURE

REPLACING SERVOTRONIC STEERING CONTROL VALVE ACTUATOR

NOTE:

Global Technical Reference (GTR) lookup sequence is as follows:

Steering - Control Valve Actuator Availability|Page 9800 > < Power Steering Line/Hose|Service and Repair|Page 9795