Range Rover Sport (LS) V8-4.2L SC (2006)
5.
Turn the steering wheel to the opposite full lock, and repeat steps 2 and 3.
6.
Remove the temperature reading equipment from the PAS fluid reservoir.
7.
Install the PAS fluid reservoir cap.
8.
Road test the vehicle and check for a squeaking noise from the PAS system.
NOTE:
If the vehicle continues to exhibit a squeak after the road test, carry out the 'Heating the steering fluid to 100 +/- 5°C' (212°F +/- 10°F) (Steps 1
- 3) and 'Performing the Steering Maneuver' (Steps 2 - 5) a maximum of two additional times. If further problems occur, contact the Land
Rover Technical HelpLine for further information.