Range Rover Sport (LS) V8-4.2L SC (2006)
19. Remove the air cleaner assembly.
20. CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug open
connections to prevent contamination.
NOTE: Some fluid spillage is inevitable during this operation.
Disconnect the fluid return line from the reservoir.
^
Position a container to collect the fluid spillage.
^
Reposition the fluid line into the wheel arch area.
21. Release the valve block to front stabilizer bar actuator pipe assembly mountings.
^
Remove the 2 nuts and 1 bolt.
22. CAUTION: Always plug any open connections to prevent contamination.
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug open
connections to prevent contamination.
NOTE: Some fluid spillage is inevitable during this operation.
Disconnect the front actuator pipes from the valve block.
^
Position a container to collect the fluid spillage.
^
Remove and discard the 2 nuts.
^
Install blanking caps to the exposed ports.