Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-1729002.png)
Special Service Tools (Part 2)
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the wheel and tire.
3. Remove the wheel knuckle.
4. Remove the adjuster and return spring.
5. Remove the primary brake shoe.
^
Remove the hold-down spring and retaining pin.
^
Pivot the shoe to release it from the spreader plate and return spring.
6. Remove the spreader plate and spring.
7. Remove the return spring.
8. Remove the secondary brake shoe.
^
Remove the hold-down spring and retaining pin.
^
Disconnect the parking brake cable retaining spring from the brake shoe lever.
