Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-1807001.png)
Seals and Gaskets: Service and Repair
Transfer Case Input Shaft Seal
Transfer Case Input Shaft Seal - 4.2L, Vehicles With: Supercharger
Service Repair No - 41.20.50
Special Service Tools
Removal
1. Disconnect the battery ground cable.
2. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
3. Remove the transfer case.
4. CAUTION: Care must be taken to avoid damage to the seal register and running surface.
Carefully remove and discard the oil seal.
^
Use the special tool.
Installation
1. CAUTION: Oil seals must be fitted dry.
Install a new seal.
^
Clean the seal register.
^
Use the special tool.
