Range Rover Sport (LS) V8-4.4L (2009)
Installation
1. Install the screw retainer and clip to the A-pillar upper trim panel.
2. Install the A-pillar upper trim panel.
^
Secure with the clip.
^
Install a new Torx screw and tighten to 3 Nm (2 ft. lbs.).
^
Install the screw cover.
3. Install the instrument panel end panel.
^
Secure with the clip.
4. Attach the door weatherstrip.
B-Pillar Lower Trim Panel
B-Pillar Lower Trim Panel
Service Repair No - 76.13.29
Removal
1. Remove the B-pillar lower trim panel.
^
Release weatherstrip from both sides of the B-pillar lower trim panel.
^
Release the 4 clips.
2. NOTE: Do not disassemble further if the component is removed for access only.
Remove 4 clips from the B-pillar lower trim panel.
Installation
1. To install, reverse the removal procedure.
B-Pillar Upper Trim Panel