Range Rover Sport (LS) V8-4.4L (2009)
1. Raise the rear of the roof opening panel to the vent position. (Figure 1)
2. Beginning at the rear edge, remove the seal from the channel until it contacts the body aperture. (Figure 2)
3. Close the roof opening panel.
4. Open the roof opening panel enough to access the front edge of the seal. (Figure 3)
5. Remove the seal from the glass panel. (Figure 3)
6. Close the roofopening panel.
7. Raise the rear of the roof opening panel to the vent position. (Figure 1)
8. Identify the new seals (LR018247) split line.