Range Rover Sport (LS) V8-4.4L (2009)
6. Remove the 2 clips.
7. Remove the washer jet.
^
Release the clip.
Installation
1. Install the high mounted stoplamp.
^
Install the Torx screws.
2. Install the washer jet.
3. Install the 2 clips.
4. Install the spoiler.
^
Connect and secure the electrical connector.
^
Connect the washer jet hose.
^
Tighten the nuts to 10 Nm (7 ft. lbs.).
^
Tighten the Torx bolts to 25 Nm (18 ft. lbs.).
5. Connect the battery ground cable.