Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-1448001.png)
Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir
Brake Fluid Reservoir
Service Repair No - 70.25.31
Removal
CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove the fluid and clean the area with water.
1. Remove the cover.
2. Position an absorbent cloth to collect fluid spillage.
3. Disconnect the low brake fluid warning indicator switch electrical connector.
4. CAUTION: Always plug any open connections to prevent contamination.
Remove the brake fluid reservoir.
^
Release the 2 clips.
^
Remove and discard 2 brake fluid reservoir seals.
Installation
1. Clean the components.
2. Install the brake fluid reservoir.
^
Install new brake fluid reservoir seals.
3. Connect the low brake fluid warning indicator switch electrical connector.
4. Bleed the brake system using T4.
