Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-639002.png)
Installation
1. Install the oil pan.
^
Clean the component mating faces.
^
Apply a bead of sealant, 3 mm diameter by 130 cm long, to the areas indicated. See specifications for sealant information.
^
Tighten the bolts to 20 Nm (15 ft. lbs.).
2. Install the transmission retaining bolts.
^
Tighten the bolts to 45 Nm (33 ft. lbs.).
3. Install the HO2S mounting bracket.
^
Tighten the 2 bolts to 10 Nm (7 ft. lbs.).
4. Connect the HO2S electrical connectors.
^
Install the wiring harness clips.
5. Install the HO2S wring harness.
^
Secure the clips.
6. Install the generator mounting bracket.
^
Clean the component mating faces.
7. Install the generator.
8. Install the steering gear.
9. Install the front differential.
10. Install the oil cooler assembly.
11. Install the engine front cover.
12. Fill the engine with oil.
13. Connect the battery ground cable.
