Range Rover Sport (LS) V8-4.4L (2009)
Exhaust Manifold: Service and Repair
Exhaust Manifold RH
Exhaust Manifold RH
Service Repair No - 30.15.11
Removal
1. Disconnect the battery ground cable.
2. Remove the exhaust system.
3. Remove the fender splash shield.
4. NOTE: The heatshield consists of 3 parts.
Remove the upper suspension arm and brake line heat shields for access.
^
Remove the 3 nuts.
^
Remove the 3 bolts.
5. Remove the exhaust manifold.
^
Remove the 8 bolts.
^
Collect the spacers and discard the bolts.
^
Remove the gasket/heat shield retaining bolt.
^
Discard the gasket/heat shield.
Installation
1. Clean the component mating faces.
2. Install the exhaust manifold.
^
Install the gasket/heat shield.
^
Tighten the heat shield bolt to 25 Nm (18 ft. lbs.).
^
Evenly and progressively, tighten the bolts in the sequence shown to 20 Nm (15 ft. lbs.).