Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-1865001.png)
Air Door Actuator / Motor: Service and Repair
Driver Side Temperature Blend Door Actuator
Driver Side Temperature Blend Door Actuator
Service Repair No - 80.10.37
Removal
1. Remove the instrument panel driver side reinforcement.
2. Remove the driver side footwell duct.
^
Remove the 2 Torx screws.
3. Remove the temperature blend door actuator.
^
Disconnect the electrical connector.
^
Remove the 2 screws.
Installation
1. Install the temperature blend door actuator.
^
Tighten the screws.
^
Connect the electrical connector.
2. Install the driver side footwell duct.
^
Tighten the screws.
3. Install the instrument panel driver side reinforcement.
