Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-2381015.png)
Temperature Display Units
The 'TEMP. DISPLAY UNITS' menu allows the driver to change the units in which the external temperature is displayed in the message center. The
units can be changed using the steering wheel + or - buttons.
The menu allows the driver to select the following units:
^
Degrees C (default)
^
Degrees F
Programmable Overspeed Warning
Programmable Overspeed Warning
The 'OVERSPEED WARNING' menu allows the driver to set the overspeed warning threshold. The threshold can be changed using the steering wheel +
or - buttons.
The menu allows the driver to select the following:
^
KM/H - 10 to 250 Km/h in increments of 5 Km/h. The default value is OFF.
^
MPH - 10 to 140 mph in increments of 5 mph. The default value is OFF.
If the units are changed from miles to kilometers or visa versa, the overspeed warning value will go to the default OFF value.
Headlamp Timer
Headlamp Timer
The 'HEADLAMP OFF DELAY' menu allows the driver to adjust the delay period for the headlamp delay after the ignition is switched off function. The
delay period can be changed using the steering wheel + or - buttons.
The menu allows the driver to select the following delay periods (in seconds):
^
30 (default)
^
60
^
120
^
240
Doors Lock on Driveaway
Doors Lock On Driveaway
The 'DRIVE AWAY DOOR LOCKING' menu allows the driver to disable or enable the door automatic lock function. The feature can be changed to on
or off using the steering wheel + or - buttons.
The menu allows the driver to select the following:
^
OFF
^
ON (default)
Mirror Dip In Reverse (If Fitted)
Mirror Dip In Reverse (If Fitted)
The 'REVERSE MIRROR DIP' menu allows the driver to disable or enable the automatic exterior mirror dip in reverse function. The feature can be
changed to on or off using the steering wheel + or - buttons.
The menu allows the driver to select the following:
^
OFF
^
ON (default)
Lazy Entry (If Memory Module Fitted)
Lazy Entry (If Memory Module Fitted)
The 'LAZY ENTRY' menu allows the driver to disable or enable the lazy entry function which moves the exterior door mirror and the seat position to
that set by the driver. The memory positions are stored in the memory module and the individual settings are recognized from the ignition key
identification. The feature can be changed to on or off using the steering wheel + or - buttons.
The menu allows the driver to select the following:
^
OFF (default)