Range Rover Sport (LS) V8-4.4L (2009)
3. Install the passive coil.
^
Secure the clips.
^
Connect the electrical connector.
4. Install the ignition switch assembly.
^
Tighten the shear bolts until the heads shear off.
^
Connect the electrical connector.
5. Install the steering column switch assembly.
^
Tighten the Torx bolts to 3 Nm (2 ft. lbs.).
6. Connect the clockspring and multifunction switch electrical connectors.
7. Install the steering column shrouds.
^
Connect the electrical connector.
^
Tighten the Torx screws.
^
Secure the clips.
8. Install the steering wheel.
9. Connect the battery ground cable.