Range Rover Sport (LS) V8-4.4L (2009)
Transfer Case Actuator: Service and Repair
Transfer Case Shift Motor
Service Repair No - 41.30.03
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the transmission crossmember.
3. CAUTION: To avoid damage to the joints or gaiters, do not allow the transmission to hang on the driveshafts.
Remove the shift motor.
^
Lower the rear of the transmission for access.
^
Disconnect the electrical connector.
^
Remove the 4 Torx bolts.
Installation
1. Install the shift motor.
^
Clean the components.
^
Tighten the Torx bolts to 25 Nm (18 lb.ft).
^
Connect the electrical connector.
2. Install the transmission crossmember.
3. Use T4 to re-calibrate a new transfer case shift motor.