landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Signal Processing Module > < Component Locations|Page 75
Page 1
background image

Parking Assist Control Module: Service and Repair

Parking Aid Module 

Service Repair No - 86.54.10

Removal

1. Disconnect the battery ground cable.        
2. Remove the LH rear quarter trim panel.        
3. Remove the parking aid module.

^

Remove the 2 screws.

^

Disconnect the 3 electrical connectors.

Installation

1. Install the parking aid module.

^

Connect and secure the electrical connectors.

^

Tighten the screws.        

2. Install the rear quarter trim panel.        
3. Connect the battery ground cable.        

Signal Processing Module > < Component Locations|Page 75