Range Rover Sport (LS) V8-4.4L (2009)
Cruise Control Module: Service and Repair
Speed Control Module
Removal
1. Disconnect the battery ground cable.
2. Remove the Dynamic Response module.
3. Remove the speed control module.
^
Loosen the bolt.
^
Release and disconnect the electrical connector.
Installation
1. Install the speed control module.
^
Connect and secure the electrical connector.
^
Tighten the bolt to 10 Nm (7 ft. lbs.).
2. Install the Dynamic Response module.
3. Connect the battery ground cable.
4. Program a new control module using T4.