landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Side Air Curtain Module|Page 6614 > < Seat Position Sensor|Locations
Page 1
background image

Side Air Bag: Service and Repair
Side Air Curtain Module

Side Air Curtain Module 

Service Repair No - 76.74.40

Removal

WARNING:

^

It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.

^

Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse
connect the battery.

NOTE: If the SRS component is to be replaced, the bar code of the new unit must be recorded.

1. Disconnect the battery ground cable.
2. Make the SRS system safe.
3. Remove the headliner.
4. Release the roof opening panel drain tube from the securing clips.

^

Release from the 2 clips.

^

Remove and discard 2 cable ties.

NOTE: If the SRS component is to be replaced, the bar code of the new unit must be recorded.

5. With assitance, remove the side air curtain module.

^

Disconnect the electrical connector.

^

 Remove the 9 Torx bolts.

^

Remove the 2 screws.

Installation

1. With assistance, install the side air curtain module.

^

Tighten the Torx screws to 10 Nm (7 lb.ft).

^

Tighten the screws.

Side Air Curtain Module|Page 6614 > < Seat Position Sensor|Locations