Range Rover Sport (LS) V8-4.4L (2009)
Knock Sensor: Service and Repair
Knock Sensor (KS)
Service Repair No - 18.30.30
Removal
NOTE: The LH and RH Knock sensors are removed and serviced as a pair.
1. Disconnect the battery ground cable.
2. Remove the intake manifold gaskets.
3. Remove the KS.
^
Disconnect the electrical connector.
^
Remove the 2 bolts.
Installation
1. To install, reverse the removal procedure.
^
Clean the component mating faces.
^
Tighten the bolts to 20 Nm (15 ft. lbs.).