Range Rover Sport (LS) V8-4.4L (2009)
5. Install a new halfshaft retaining nut and lightly tighten.
6. CAUTION: Ensure the ball joint seal is not damaged. A damaged seal will lead to the premature failure of the joint.
Connect the lower arm to the wheel knuckle.
^
Tighten the nut and bolt to 175 Nm (129 lb.ft).
7. Connect the toe link.
^
Using a M14 X 2 tap, clean the threads of the knuckle fixing hole. Blow out debris with an air-line.
^
Tighten the new bolt to 175 Nm (129 lb.ft).
8. Install the wheel speed sensor.
^
Tighten the bolt to 9 Nm (7 lb.ft).
9. Locate the parking brake cable to the backplate.
^
Connect the cable to the brake shoe lever.
^
Tighten the coupling to 8 Nm (6 lb.ft).
^
Secure the parking brake cable to the lower arm.
10. Install the brake disc.
11. Tighten the halfshaft retaining nut to 350 Nm (258 lb.ft).
^
Stake the nut to the halfshaft.
12. Install the wheel and tire.
13. Carry out the wheel alignment procedure.