Range Rover Sport (LS) V8-4.4L (2009)
1. Check the front suspension upper control arm bushings for cracks or splits. (Figure 9)
^ If cracks or splits are evident, replace as necessary.
2. Check for correct torque of front suspension upper control arm front and rear bushing nuts. (Figure 10)
^ If torque-tightening is necessary, the vehicle must be at correct ride height to prevent pre-loading of the bushings.
FRONT SUSPENSION DYNAMIC RESPONSE ACTUATOR AND FRONT DIFFERENTIAL CROSS MEMBER TORQUE CHECK
1. Refer to Workshop Manual (GTR) section 501-02: and remove the engine undershield.