Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-1703005.png)
instruction may result in damage to the vehicle.
CAUTION: Use a Torx socket to prevent the ball joint rotating whilst installing the nut.
Secure the stabilizer bar link.
^
Install a new nut and tighten to 175 Nm (129 lb.ft).
Vehicles with Active Stabilization
8. CAUTION: Make sure the hardened steel washer is installed between the stabilizer bar link and the upper arm. Failure to follow this
instruction may result in damage to the vehicle.
CAUTION: Use a Torx socket to prevent the ball joint rotating whilst installing the nut.
Secure the stabilizer bar link.
^
Install a new nut and tighten to 175 Nm (129 lb.ft).
9. Tighten the lower arm ball joint retaining nut to 115 Nm (85 lb.ft).
10. Connect the tie-rod end ball joint.
^
Install a new nut and tighten to 70 Nm (52 lb.ft).
11. Install a new halfshaft retaining nut and lightly tighten.
12. Install the wheel speed sensor.
^
Tighten the bolt to 10 Nm (7 lb.ft).
Vehicles with standard brakes
13. Install the brake disc.
Vehicles with high performance brakes
14. Install the brake disc.
All vehicles
15. Tighten the new halfshaft retaining nut to 350 Nm (258 lb.ft).
^
Stake the nut to the halfshaft.
16. Install the wheel and tire.
^
Tighten the wheel nuts to 140 Nm (103 lb.ft).
