Range Rover Sport (LS) V8-4.4L (2009)
With vehicle raised to desired height, position axle stands at positions shown.
CAUTION: Position suitable material between axle stands and longitudinal members to prevent damage to the longitudinal members.
Carefully lower jack until vehicle rests on axle stands.
WARNING: Before commencing work on underside of vehicle, ensure that axle stands are correctly positioned and vehicle is securely
supported.
Reverse procedure when removing vehicle from stands.
Raising Vehicle - One Wheel/side
Apply the parking brake.
Select 'P' - PARK on automatic transmission selector.
WARNING: Always chock the wheels which are not to be raised.
^
One front wheel - position lifting pad of hydraulic jack beneath longitudinal member on the side to be raised at Point 'A'
^
One rear wheel - position lifting pad of jack beneath longitudinal member on the side to be raised at Point 'B'
^
Front and rear wheels - ONE SIDE - position lifting pad of jack beneath longitudinal member on the side to be raised at Point 'C'
NOTE: Point 'C' is in line with number 3 body mounting.