Range Rover Sport (LS) V8-5.0L SC (2010)
Ensure all ignition "ON"/ignition "OFF" request are carried out; failure to perform these steps may cause damage to control modules in vehicle.
CAUTION:
A Land Rover-approved Midtronics Vehicle Power Supply must be connected to the vehicle battery during IDS diagnosis/module programming.
1. Connect the Land Rover-approved Midtronics Vehicle Power Supply to the vehicle battery.
NOTE:
IDS must be loaded with IDS-DVD121 -V6.10 or later and Calibrated File 40 or later.
2. Connect the IDS to the vehicle and begin a new Symptom Driven Diagnostics (SDD) session.
3. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle.
4. From the Session Type selection screen, choose Diagnosis.
5. Select the "Selected Symptoms" tab, and then select:
^ Electrical > Information and entertainment system > Navigation system > Display
6. Select "continue".
7. Select the Recommendations" tab.
8. From the Recommendation tab, select "Run" to configure the "Information and entertainment system initilization timer"
^ Follow all on-screen instructions to complete this task.
9. Exit the current session.
10. Disconnect the IDS and the Midtronics vehicle Power Supply form the vehicle.