landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Relays and Modules - Steering and Suspension > < Campaign - Quality Assurance Program|Page 432
Page 3
background image

^

Configure existing module > Keyless vehicle module

NOTE:

Ignore the instruction to fit a new Immobilizer antenna unit (IAU) when instructed during the IAU configuration procedure.

^

Configure new modules> Immobilizer antenna unit

^

Configure existing module > Drivers door module

^

Configure existing module > Passengers door module

^

Configure existing module > Active ride control module (Dynamic Response)

^

Battery > Battery replacement (only if a new battery is installed)

7. Follow all on-screen instructions to complete these tasks.

8. Exit the current session.

9. Disconnect the IDS and the Midtronics Vehicle Power Supply from the vehicle.

10. Close all doors, tailgate, and hood.

11. Lock the vehicle; wait 10 seconds.

12. Unlock the vehicle; wait 10 seconds.

13. Repeat steps 11 and 12.

14. Verify radio (AM / FM / CD / SDARS) operation.

Disclaimer

Relays and Modules - Steering and Suspension > < Campaign - Quality Assurance Program|Page 432