Range Rover Classic
REAR SUSPENSION
1
SPECIFICATIONS, TORQUE
TORQUE VALUES
NOTE: Torque wrenches should be regularly checked for accuracy to ensure that all fixings are
tightened to the correct torque.
Nm
Anti-roll bar rear
- Strap nyloc nuts
30
..............................................................................
- Ball link self lock nut
68
........................................................................
- Castellated nut
40
................................................................................
Ball joint - levelling unit to rear axle
176
...........................................................
Top link to levelling unit
115
.............................................................................
Top link to mounting bracket
176
.....................................................................
Upper joint to levelling unit
34
.........................................................................
Lower joint to levelling unit
34
.........................................................................
Bottom link to axle
176
.....................................................................................
Bottom link to chassis
176
...............................................................................
Top link bracket to rear cross member
47
......................................................
Levelling unit to cross member
47
..................................................................
Shock absorber to axle
37
..............................................................................
Torque values below are for all screws and bolts used except for those that are specified otherwise.
METRIC
Nm
M5
6
......................................................................................................
M6
9
......................................................................................................
M8
25
.....................................................................................................
M10
45
...................................................................................................
M12
90
...................................................................................................
M14
105
..................................................................................................
M16
180
..................................................................................................
UNC / UNF
1/4
9
......................................................................................................
5/16
24
...................................................................................................
3/8
39
.....................................................................................................
7/16
78
...................................................................................................
1/2
90
.....................................................................................................
5/8
136
....................................................................................................