Aviator 2WD V8-4.6L DOHC (2003)
12.
Remove the three (3) brake disc shield-to-wheel knuckle bolts (Figure 4). To install, tighten to 10 lb-ft (13 N.m)
13.
Using a suitable press, remove the wheel hub (Figure 5).
14.
Remove the brake disc shield.
NOTE
THIS STEP MAY NOT BE NECESSARY IF THE INNER WHEEL BEARING RACE REMAINS IN THE WHEEL KNUCKLE AFTER
REMOVING THE WHEEL HUB.
15.
Using Special Tool 205-D002, or equivalent, press the inner wheel bearing race from the wheel hub (Figure 6).
16.
Remove the wheel bearing retainer ring.
17.
Using a suitable press, remove and discard the wheel bearing.