Aviator 2WD V8-4.6L DOHC (2003)
1. Tighten the screws in a crisscross sequence.
Item 5: Solenoid Body Harness Electrical Connector Installation Note
1. CAUTION: Damage will occur to the solenoid body assembly if the screw is tightened above specification.
NOTE: Always install new O-ring seals on vehicle harness connector.
NOTE: Clean the area around connector to prevent contamination of the solenoid body connector.
NOTE: Use petroleum jelly to lubricate the O-ring seals to aid in the installation process.
Install and lubricate new O-ring seals on the transmission connector and connect the connector.