Continental V8-4.6L DOHC (1995)
General Module: Initial Inspection and Diagnostic Overview
Inspection and Verification
1. Verify the vehicle owner's concern.
2. Inspect to determine if one of the following electrical concerns apply:
Visual Inspection Chart - Electrical
- Check system fuses 6, 12, 18, and 24
- Check electrical connections for obvious damage, opens or shorts.
3. Inspect Pin 2 and Pin 10 on the Data Link Connector (DLC) for loose, bent, deformed, corroded or broken pins. If pin is damaged, service or
replace pin, verify communication with Rotunda New Generation Star Tester 007-00500 or equivalent.
4. If the concern(s) remains after the inspection, continue with New Generation Star Tester Driven Diagnosis. See: Reading and Clearing Diagnostic
Trouble Codes/Displaying and Reading Trouble Codes/New Generation Star Tester Driven Diagnosis