Mark LT 2WD V8-5.4L (2008)
![background image](/lincoln/mark_lt_2wd/v8-5.4l/Page-1909001.png)
Blower Motor: Service and Repair
BLOWER MOTOR
Removal and Installation
1. Remove the RH lower A-pillar trim panel.
2. Position aside the carpet below the blower motor.
3. Disconnect the blower motor electrical connector.
4. Remove the 3 blower motor screws.
5. Remove the blower motor.
6. Remove the blower motor wheel.
1
Remove the blower motor wheel clip.
2
Remove the blower motor wheel.
7. To install, reverse the removal procedure.