Mark LT 2WD V8-5.4L (2008)
5. CAUTION: The transmission fluid in-line filter has a bypass valve in it. The arrow on the transmission fluid in-line filter indicates the
direction of transmission fluid flow through the transmission fluid in-line filter. The transmission fluid in-line filter must be installed in
the transmission fluid cooler return tube with the arrow on the transmission fluid in-line filter pointing away from the transmission fluid
cooler and toward the transmission (the return tube has transmission fluid coming out of the cooler going to the transmission). If the
transmission fluid in-line filter is not installed correctly, it will cause internal transmission damage.
CAUTION: Do not install any rubber hoses or steel tubing with a bend entering the filter greater than 60 degrees.
Using a suitable length of hose install the transmission fluid in-line filter. Tighten the hose clamps.
6. Clean a section of the transmission fluid pan and install the sticker.
7. If equipped, install the skid plate and the bolts.