Mark LT 2WD V8-5.4L (2008)
Stabilizer Link: Service and Repair
Stabilizer Bar and Link
Stabilizer Bar And Link
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure may
result in major service expense. New parts must be installed with the same part numbers or equivalent part, if replacement is necessary. Do
not use a replacement part of lesser quality or substitute design. Torque values must be used during reassembly to make sure correct
retention of these parts.
NOTE: Use the holding feature to prevent the studs from turning while removing or installing the stabilizer bar link nuts.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the stabilizer bar link upper nuts.
3. Remove and discard the stabilizer bar link lower nuts and the stabilizer bar links.
4. Remove and discard the stabilizer bar bracket nuts, brackets and the stabilizer bar.
Installation