MKX AWD V6-3.5L (2007)
3. NOTE: LH shown, RH similar.
Install the LH and RH 12 front guide track-to-housing screws.
-
Align the track to the marks previously made. Tighten to 5 Nm (44 lb-in).
4. NOTE: LH shown, RH similar.
Install the front drive tube bracket-to-guide track screws.
-
Tighten to 5 Nm (44 lb-in).
5. NOTE: LH shown, RH similar.
Install the remaining 4 rear shade track-to-housing screws.
-
Align the track to the marks previously made. Tighten all shade track-to-housing screws to 5 Nm (44 lb-in).
6. NOTE: LH shown, RH similar.