MKZ AWD V6-3.5L (2008)
Rear Seat Backrest, 40 Percent
Removal and Installation
1. Remove the rear seat cushion.
2. Remove the 60 percent rear seat backrest.
3. Release the lower J-strip and partially invert the backrest trim cover to access the armrest-to-backrest bolts.
4. Remove the 4 armrest-to-backrest bolts and support plate.
-
For installation, adjust the armrest horizontally as needed for good fit.
-
To install, tighten to 10 Nm (89 lb-in).
5. Separate the armrest and bracket assembly from the backrest and position aside.
-
For installation, align the armrest bracket locator tab to the backrest frame.