MKZ AWD V6-3.5L (2008)
NOTE:
-
This procedure is for vehicles equipped with side air curtains. On vehicles without side air curtains, the A-pillar trim panel is easier to remove and
the retainers are reusable.
-
The A-pillar trim panel is held in place by a clip that is snapped to the back of the panel. When installing the existing trim panel, a new clip must
be installed.
1. NOTE: When removing the A-pillar trim panel, use a gentle side-to-side rocking motion to free the clip from the trim panel.
Remove the A-pillar trim panel and the clip from the sheet metal.
-
Use a new A-pillar trim panel clip when installing.
2. To install, reverse the removal procedure.
-
Align attachment clips to the holes and snap in place.