lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

ABOUT US
A/C - Reduced Heater Output At Idle|Page 2209 > < A/C - Reduced Heater Output At Idle|Page 2207

MKZ AWD V6-3.5L (2008)

Page 1
background image

Thermostat Housing: Service and Repair

Thermostat Housing - 3.5L

Material

Removal and Installation

1. Remove the thermostat.
2. Disconnect the 4 coolant hoses from the thermostat housing and position them aside.
3. Remove the 2 thermostat housing bolts.

^

To install, tighten to 10 Nm (89 lb-inch).

4. NOTE: Do not pull the other end of the coolant tube out of the engine block when separating the thermostat housing.

A/C - Reduced Heater Output At Idle|Page 2209 > < A/C - Reduced Heater Output At Idle|Page 2207