MKZ AWD V6-3.5L (2008)
^
If camshaft end play exceeds specification after camshaft installation, install a new cylinder head.
Camshaft Surface Inspection
1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
Camshaft Lobe Lift
Special Tool(s)
NOTE: Refer to the appropriate specification chart.
1. Use an indicator gauge to measure camshaft intake/exhaust lobe lift.
^
Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.
