MKZ AWD V6-3.5L (2008)
Position the RH halfshaft in the transaxle and install the 2 bolts.
^
Tighten to 23 Nm (17 lb-ft).
All vehicles
51. NOTE: Prior to installation of the halfshaft, inspect the halfshaft sealing surface for wear or damage and install new, if necessary.
Install the LH halfshaft into the transaxle.
52. Using the special tool, raise the subframe into the installed position.
53. NOTE: LH shown, RH similar.
Install the 2 front subframe nuts.
^
Tighten to 150 Nm (111 lb-ft).
