MKZ AWD V6-3.5L (2008)
88. Using a new O-ring seal, connect the A/C tube to the condenser and install the nut.
^
Tighten to 8 Nm (71 lb-inch).
89. Attach the coolant tube retainer clips to the A/C tube.
90. If equipped, attach the engine block heater harness to the radiator support, power steering hose, A/C tube and the engine wiring harness.
91. Install the ground wire and bolt.
^
Tighten to 12 Nm (9 lb-ft).
