MKZ AWD V6-3.5L (2008)
4. Remove the 6 pin-type retainers (4 shown) and the RH splash shield.
5. Working from under the vehicle, remove the accessory drive belt.
Installation
1. Working from under the vehicle, position the accessory drive belt on all pulleys, with the exception of the generator pulley.
2. NOTE: After installation, make sure the accessory drive belt is correctly seated on all pulleys.
Working from the top of the vehicle, using a suitable belt tensioner release tool, rotate the accessory drive belt tensioner clockwise and install the
accessory drive belt on the generator pulley.
3. Install the RH splash shield and the 6 pin-type retainers (4 shown).
4. Position the RH fender splash shield and install the 4 screws.
