MKZ AWD V6-3.5L (2008)
Part 2
Removal and Installation
1. Disconnect the crankcase vent tube from the air cleaner outlet pipe.
2. Loosen the air cleaner outlet pipe-to-air cleaner cover clamp.
-
To install, tighten to 5 Nm (44 lb-in).
3. Loosen the air cleaner outlet pipe-to-throttle body clamp.
-
Remove the air cleaner outlet pipe.
-
To install, tighten to 5 Nm (44 lb-in).
4. NOTE: The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.
To install, reverse the removal procedure.