MKZ AWD V6-3.5L (2008)
Gearshift Cables (Part 2)
Removal
1. Remove the heater core and evaporator core housing. For additional information, refer to Heating and Air Conditioning.
2. Remove the battery tray.
3. NOTE: Carefully disconnect the spring clip, do not damage the spring clip.
Disconnect the gearshift cables from the shift mechanism.
^
Pull the spring clip out of the groove. Lift upward to rotate the clip 90 degrees.
4. NOTE: Carefully pry the retainer on the shift cable. Do not damage the shift cable retainers.
Disconnect the gearshift cables from the transaxle bracket.