MKZ AWD V6-3.5L (2008)
4. Remove the 4 gearshift lever nuts.
5. Remove the gearshift lever assembly.
Installation
1. Position the gearshift lever assembly in the vehicle.
2. Install the 4 gearshift lever nuts.
^
Tighten to 23 Nm (17 lb-ft).
3. Connect the selector cable.
4. Connect the shift cable.
^
Tighten the nut to 9 Nm (80 lb-in).
5. Adjust the gearshift cables.
6. Position the console and install the 2 console screws to the shifter base.
7. Install the 2 front console center bolts and then install the 2 rear side console bolts.
