MKZ AWD V6-3.5L VIN T (2007)
Valve Seat: Service and Repair
Valve Seat Inspection
Valve and Seat Refacing Measurements
CAUTION: After grinding valves or valve seats, check valve clearance.
1. Check the valve head and seat.
^
Check valve angles.
^
Check margin width.
^
Be sure margin width is within specification. For additional information, refer to the specification chart in the appropriate engine information.
^
If out of specification, install new components as necessary.
2. Inspect for abnormalities on the valve face and seat. Install a new cylinder head assembly if abnormalities are found.