MKZ AWD V6-3.5L VIN T (2007)
4. Position a screwdriver between the power steering fluid reservoir and the power steering fluid reservoir bracket.
5. NOTE: Reservoir and bracket removed from vehicle for clarity.
Release the tab and slide the power steering fluid reservoir off the bracket.
6. NOTE: It is easier to access the power steering fluid reservoir-to-pump supply hose clamp from underneath the vehicle at the power steering
pump.
Release the clamp and disconnect the pump supply hose from the power steering pump.
7. Remove the power steering fluid reservoir and pump supply hose.
8. To install, reverse removal procedure.
-
Fill the power steering system.