Navigator 2WD V8-5.4L (2007)
Cowl Moulding / Trim: Service and Repair
COWL PANEL GRILLE
Removal and Installation
1. Remove the windshield wipers.
2. Remove the cowl grille seal.
3. Remove the pin-type retainer and left side cowl trim panel.
-
Disconnect the windshield washer tube.
4. Remove the right side cowl trim panel.
1
Disconnect the windshield washer tube.
2
Remove the pin-type retainer.
5. To install, reverse the removal procedure.
6. If necessary, adjust the windshield wiper arms.
