Navigator 2WD V8-5.4L (2007)
2. Remove the 3 screws and the upper and lower steering column shrouds.
^
Disconnect the power tilt electrical connector switch from the lower shroud.
Vehicles with manual tilt
3. If equipped, release the tabs and slide the gear selector cover away from the steering column shrouds.
4. Remove the 3 screws and the upper and lower steering column shrouds.
All vehicles
5. Disconnect the multi-function switch electrical connector.
6. Remove the 2 screws and the multi-function switch.
7. To install, reverse the removal procedure.
