Navigator 2WD V8-5.4L DOHC VIN R (2001)
6. Connect the heater inlet line (18696-E) to the heater inlet line (18696-D).
1
Connect the fittings.
2
Loosely install the nut.
7. Install the heater inlet line (18696-F).
^
Install the end with the green tape through the floor opening.
8. Connect the heater inlet line (18696-B) to the heater inlet line (18696-E).
1
Connect the fittings.
2
Loosely install the nut.
9. Tighten the four peanut fittings.